HOME | PRODUCTS | INSTRUCTIONS | MSDS | CLIENTS | ORDER FORM | CONTACT

IRON CRETE TM #5150
(All Iron Aggregate)

Material Safety Data Sheet

Revision Date: January/01/2017
Product Name: Iron Crete Fast Set
Chemical family: Hydraulic chemical compounds
Hazardous classification: Nuisance dust

1. Hazardous or Toxic Ingredients

Portland cement cas no. 65997 15 1 5mg/m3

 

 TLV 
(respirable dust)		 Level
10 30%

2. Physical Data

Boiling point (f): N/A
Vapour pressure (mm hg): N/A
Specific gravity: N/A
Percent volatile, (by weight): N/A
Evaporation rate (either-1): N/A
Solubility in water: slight
Appearance and odour: dark gray, odourless fine powder

 

3: Fire and Explosion Hazard Data

Flash point: N/A
Method used: N/A
Flammable limits: N/A
UFL: N/A

 

Extinguishing media: This material does not give a flash point by conventional test methods.
Use extinguishing agent suitable for type of surrounding fire.

Special fire and usual hazards: N/A

 

4. Reactivity Data

Incompatibility: strong mineral acids
Hazardous decomposition products: none
Hazardous polymerization: will not occur

 

5.Environmental and Disposal Information

Action to take for spills/leaks:
No special procedures are required for clean up of spills or leaks of this material.
Sweep up and return for re-use or discard. waste disposal method:
This product, when discarded or disposed of is not listed as a hazardous waste in federal regulations.

6. Health Hazard Data

Health hazard rating no. 2 (moderate hazard) temporary or minor injury may occur.
Effects of  overexposure: Acute.
Nuisance dust may cause temporary but reversible respiratory problems.
Abrasive action may cause damage to the outer surface of the eye.
In the combination with water dermal exposure may cause skin irritation, rash and alkali burns.
Chronic: material is not a carcinogen, mutagen, or teratogen.

7. First Aid

Flush eyes with large quantities of water for at least 15 min.
Seek immediate medical attention.
Skin: wash with soap and water.
Get medical attention if exposure is extensive.
Remove clothing and wash before reuse Ingestion: N/A
Inhalation: Remove individual to fresh air.

8. Special Protection Information

Ventilation: Ventilation may be used to control or reduce air borne concentration.
Respiratory protection: None normally required, where dust is excessive use niosa approved mask
Skin protection: Impervious gloves are recommended
Eye protection: goggles or glasses to prevent eye contact.
Do not wear contact lenses when working with this product.

9. Additional Information

Special precautions to be taken handling and storage.

Store product away from moist damp environment.

The information provided in this (material safety data sheet) has been obtained from sources believed to be reliable.
G.T.H. Industries Ltd. provides no warranties, express or implied and assumes no responsibility for the accuracy or completeness of the data contained herein.

 

HOME | PRODUCTS | INSTRUCTIONS | MSDS | CLIENTS | ORDER FORM | CONTACT

TOP