HOME | PRODUCTS | INSTRUCTIONS | MSDS | CLIENTS | ORDER FORM | CONTACT

Patch-No-More TM #5175
Base

Material Safety Data Sheet

Revision Date: January/01/2017

Product Name: BASE (Used with PATCH NO MORE Sand-Resin Mix)
Product Use: Resurfacing Material for Concrete
Manufacturer's Name: CIBA Specialty Chemicals  Canada Inc.
Supplier 24hr. phone number: 416-254-9024 (spill response)

 

 1. Hazardous Ingredients

Silica Sand: 50%
Case No. None Established
LD50: Not Applicable
Modified Liquid Epoxy Resin 9% Consisting of:
O-Crasyl Gilcidyl Ether Case No. 26447-14-3
Bisphenol A Diglycidll Ether Resin Case No. 25068-38-6
LD50: > 5000Mg/Kg Oral Rating LD50 6.1 Mg/L Inhalation Rating
WHIMIS Classification: Class 9, Division 2, Sub-Division B, -Toxic Material

 

2. Physical Data:

Appearance and Odour -Grey coloured, moist semi-solid with a slight odour
Odour Threshold - Not Applicable
Vapour Pressure - Not Applicable
Vapour Density - Not Applicable
Evaporation Rate - None
Boiling Point - . >2000C
Freezing Point - Not Applicable
pH - Neutral
Specific Gravity - 1.165
Solubility in Water -Not Soluble

 

3a. Fire and Explosion Data

Flammability - Non Flammable
Means of Extinction - Not Applicable
Flash Point - Not Applicable
Upper Flammable Limit - Not Applicable
Lower Flammable Limit - Not Applicable
Auto ignition Temperature - Not Applicable
Hazardous Combustion Products - Not Applicable

 

3b. Explosion Data:


Sensitivity to impact - Not Applicable
Sensitivity to Static Discharge - Not Applicable

 

4. Reactivity Data

Chemical Stability - Stable under Normal Conditions
Incompatible Substances - Hydrochloric Acid and Strong Oxidizing Agents
Conditions to Avoid - Extreme High Temperatures
Reactivity - Not Applicable
Hazardous Decomposition Products - Not Applicable
Hazardous Polymerization - Will not occur

 

5. Toxological Properties

Effects of Acute Exposure - Not Known
Effects of Chronic Exposure - Not Known
Exposure Limits - None Established
Route of Entry:
Inhalation - May cause dizziness, headache or nausea
Eye Contact - Mild irritation. Material is abrasive
Skin Contact - Frequent or prolonged contact may irritate the skin and can cause dermatitis 
Ingestion - Harmful if swallowed. Material is corrosive
Sensitization - Moderate sensitizer
Carcinogenicity Data - The ingredients of this product are not listed as carcinogens

 

6. Precautions for Safe Handling and Use

Hand Protection - Neoprene or Rubber Gloves
Eye Protection - Safety Glasses
Respitory Protection - Not Applicable
Body Protection - Normally not required
Ventilation Controls - Local Ventilation
Handling and Storing - Keep unused containers closed. Store between 5-40C
Waste Disposal Method - Dispose of in an approved landfill site.
Contact local authorities for disposal approval

 

7. First Aid Measures

Inhalation - Remove affected victim to fresh air, administer oxygen if breathing is difficult
Eye Contact - Flush eyes with large amounts of water until irritation subsides.
Skin Contact - Wash immediately with mild soap and warm water
Ingestion - If conscious, give large quantities of water.
Induct vomiting, get prompt medical attention


The information provided in this (material safety data sheet) has been obtained from sources believed to be reliable.
G.T.H. Industries Ltd. provides no warranties, express or implied and assumes no responsibility for the accuracy or completeness of the data contained herein.

Divider Line

HOME | PRODUCTS | INSTRUCTIONS | MSDS | CLIENTS | ORDER FORM | CONTACT

 

TOP