HOME | PRODUCTS | INSTRUCTIONS | MSDS | CLIENTS | ORDER FORM | CONTACT

Duracrylic # 5500

Material Safety Data Sheet
Revision Date: January/01/2017

1.Name & Product
Product name: Duracrylic
Product use: to be used as an additive with Iron-Crete fast set
Manufacturers name: G.T.H Industries Ltd.
Toronto Canada
Information - Telephone:416-267-6301

2.Hazardous Ingredients

None
WHIMIS Classification: not a controlled product under WHIMIS legislation

 

3.Physical Data

Appearance And Odour - A milky white liquid with a slight odour.
Odour Threshold - Not known
Vapour Pressure - 17
Vapour Density - <1 water
Evaporation Rate -<1 water
Boiling Point -<100 c
Freezing Point - 0 c
Ph - 4.5
Specific Gravity - 1.1
Solubility In Water - Dilutable

 

4.Fire and Explosion Data

Flammability - Non flammable
Means Of Extinction - Not applicable
Flash Point - Non-combustible
Upper Flammable Limit - N/A
Lower Flammable Limit - N/A
Auto Ignition Temperature - N/A
Hazardous Combustion Product - N/A
Explosion Data - N/A
Sensitivity To Impact - N/A
Sensitivity To Static Discharge - N/A

 

5.Reactivity Data

Chemical Stability - Stable under normal conditions
Incompatible Substances - N/A
Condition To Avoid - Temperature above 177 Degrees Celsius
Reactivity - N/A
Hazardous Decomposition Products - N/A
Hazardous Polymerization - Will not occur

 

6. Toxological Properties

Effects of Acute Exposure - Minor irritation
Effects of Chronic Exposure - May cause dermatitis
Exposure Limits - N/A
Route of Entry:
Inhalation - Vapours are minor irritant. Low vapour pressure makes this route unlikely.
Eye Contact - Mild Irritation expected
Skin Contact - May cause irritation and dermatitis if repeated contact is a condition
Ingestion - Mildly Toxic
Sensitization - Not known
Carcinogenicity Data - The ingredients of this product are not listed as carcinogens.

 

7. Precautions for Safe Handling and Use

Hand Protection - Neoprene or Rubber Gloves
Eye Protection - Safety Glasses
Respiratory Protection - Vapour Mask when above TLV limit.
Body Protection - Normally not required
Ventilation Controls - Local Ventilation
Handling & Storing - Keep unused containers closed. Store between 5 - 40 C°
Waste Disposal Method - Dispose of in an approves landfill site.
Contact local authorities for disposal approval.

 

8. First Aid Measures

Inhalation - Remove affected victim to fresh air - Administer oxygen if breathing is difficult
Eye Contact - Immediately flush eyes with large amounts of water for at least 15 minutes.
Get immediate medical attention.
Skin Contact - Wash Immediately with mild soap and warm water.
Ingestion - Moderately toxic. If conscious give 2 glasses of water and induce vomiting.
Get prompt medical attention.

 


The information provided in this Material Data Sheet has been obtained from sources believed to be reliable.
G.T.H. Industries Ltd. provides no warranties, express or implied, and assumes no responsibility for the accurateness or completeness of the data contained herein.

HOME | PRODUCTS | INSTRUCTIONS | MSDS | CLIENTS | ORDER FORM | CONTACT

TOP